Crochet rounds vs rows: what’s the difference, and how do you count each?
Rows go back and forth, rounds go around. That part is easy. What trips people up is the start and end of each, because that’s exactly where the count goes wrong.
Updated November 16, 2026 · 8 min read
A crochet pattern is written in rows, rounds, or both: a bag base worked in rounds, then a strap in rows. Each starts and ends differently, looks different in the fabric, and needs its own counting habit. Here are all three ways of working (rows, joined rounds and spiral rounds), how to tell which one your pattern wants, and how to keep an exact count in each.
The quick answer
- Rows are worked back and forth. You reach the end, turn the work, chain up and go back the other way. The pattern says “Row 1”, “Row 2” or “R1”.
- Joined rounds are worked around in a circle or tube. At the end you close the round with a slip stitch into the first stitch, chain up, and start the next round. The pattern says “Rnd 1” and “join with sl st”.
- Spiral rounds (continuous rounds) go around without a join. The last stitch of one round runs straight into the first stitch of the next, so you need a stitch marker to see where a round starts. Most amigurumi is worked this way.
- Count at the same moment every time: at the end of the row before you turn, when you make the join, or when you reach the marker.
Rows: back and forth
Working in rows makes flat fabric: blankets, scarves, dishcloths, garment panels. You crochet from one edge to the other, turn the piece over, and work back across the stitches you just made.
- How a row starts: with a turning chain to bring the hook up to the height of the stitch, usually ch 1 for single crochet, ch 2 for half double and ch 3 for double crochet (US terms). Your pattern tells you whether that chain counts as a stitch.
- How a row ends: in the last stitch of the row below. A common mistake is skipping the last stitch, or working into the turning chain when you shouldn’t, which makes the piece slowly narrow or widen. Count your stitches every few rows if the edges start to wander.
- What you see: because you turn, the rows alternate between the front and the back of the stitches. In tall stitches you see one row of posts per row; in single crochet the rows pair up into small ridges.
For the full method, including how to count short stitches, see how to count rows in crochet.
Joined rounds: around, then close
Joined rounds make circles, squares and tubes with a neat stepped edge: granny squares, mandalas, hats worked from the crown, coasters. Each round is a closed ring.
- How a round starts: with a beginning chain (ch 1 for sc, ch 3 for dc, and so on), worked straight up from the join. Again, the pattern says whether it counts as a stitch.
- How a round ends: “join with sl st to first sc” or “to top of beginning ch-3”. The slip stitch closes the ring. Join into the right place: joining into the wrong stitch adds or loses a stitch each round.
- Turning: most joined-round patterns don’t turn. Some do, and say “turn” at the end of each round. Turning keeps the seam straighter and gives the fabric the same look as rows; not turning gives every round the same front.
- What you see: a seam of joins and beginning chains, one step per round. It usually drifts a little to one side as it climbs. That’s normal.
Spiral rounds: around without stopping
Spiral rounds (also called continuous rounds) make seamless tubes and balls. That’s why amigurumi, many hats and most toy pieces use them. There is no slip stitch and no beginning chain. You finish the last stitch of Round 4 and the next stitch you make is the first stitch of Round 5.
- Where a round starts: only where you say it does. Put a locking stitch marker in the first stitch of the round. When you come back around to it, take it out, work that stitch, and clip the marker into the stitch you just made. It climbs with you, round by round.
- What the pattern says: “work in continuous rounds”, “do not join”, or “use a stitch marker to mark the first stitch of each round”.
- What you see: no seam, but a small step, or jog, where each round starts. It shows most at a colour change or at the last round, where patterns often tell you to finish with a slip stitch so the edge doesn’t end in a step.
Spirals are the hardest of the three to count afterwards, because nothing in the fabric marks where a round begins. The marker is not optional. Our guide to counting rounds in amigurumi goes deeper into spirals.
Side by side
| Rows | Joined rounds | Spiral rounds | |
|---|---|---|---|
| Pattern says | Row 1, R1, “turn” | Rnd 1, “join with sl st” | Rnd 1, “do not join”, “continuous rounds” |
| Start of each | Turning chain | Beginning chain | Marker in the first stitch |
| End of each | Last stitch, then turn | Slip stitch join | Back at the marker |
| Shape | Flat | Flat circles or tubes, with a seam | Tubes and balls, no seam |
| Count the moment | Before you turn | When you join | When you move the marker |
| Count in the fabric | Posts or ridges up a column | Steps up the seam | Rings out from the centre, along the marker line |
Which one does my pattern use?
Read the first three lines of the pattern and the notes at the top, not just the abbreviation:
- “Row” and “turn” mean rows.
- “Rnd” plus “join” or “sl st to first st” means joined rounds.
- “Rnd” plus “do not join”, “continuous” or “spiral” means spiral rounds.
- “Rnd” with nothing about joining: check the notes. Amigurumi patterns almost always mean spiral; granny squares and mandalas almost always mean joined.
Some designers write “Row” for everything. If the stitch count grows by the same amount every line (6, 12, 18…) and there’s no “turn”, it’s rounds.
How to count each one
Counting rows
Count at the end of each row, before you turn. In the fabric, count up one column from the first row worked into the foundation chain (the chain isn’t a row). A marker clipped into the edge every 10 rows turns any recount into “four markers plus three rows”.
Counting joined rounds
Count when you make the join. In the fabric, the seam does the work for you: each slip stitch join and beginning chain is one round, so run a tapestry needle up the seam and count the steps. Round 1 is the first ring around the centre (the stitches you worked into the magic ring or chain ring), not the ring itself.
Counting spiral rounds
Count when you reach the marker and move it up. In the fabric, start at the centre and count the rings outwards along the line of the marker. Two habits make this far easier:
- A running marker. Instead of a clip, lay a strand of smooth contrasting yarn between the last and first stitch of each round, flipping it to the front or back as you pass. When you finish, it leaves a zigzag line up the piece with one step per round, and you can count the steps.
- Check the stitch count. In a flat circle of single crochet that grows by 6 stitches a round, the stitch count tells you the round: 30 stitches means Round 5. Count stitches along the top of the round, not the posts.
Stitch counts in rounds
Most round-based patterns end each line with the number of stitches you should have, like “Rnd 3: (sc, inc) x6 (18)”. That 18 is your check. Count it before you move on, at least for the increase rounds, because one missed increase in Round 3 becomes a lopsided shape by Round 10.
In joined rounds, remember whether the beginning chain counts as a stitch. If “ch 3 counts as first dc”, you skip the first stitch of the round and the chain stands in for it, and the final count includes it. If the chain doesn’t count, you work into the first stitch and leave the chain out of your count.
Setting up a counter for rows or rounds
Whatever you count with (a clicker, a pencil tally, an app), the rules are the same: one counter for rows or rounds, add one at the same moment every time, and keep a second count for stitches if the line is long.
- Rows, joined rounds, spirals: tap before you turn, when you join, or when you move the marker up. Never halfway round.
- Stitches in a long round: count stitches or repeats, and start from zero every round. For “(sc 4, inc) x6” it’s easier to count six repeats than 36 stitches.
No app needed to try this: our free online row counter runs in your browser with a row (or round) count and a stitch count that resets each row.
Counting rounds with Tufty
Tufty is our row and stitch counter for crochet and knitting. You can set a project to worked flat or in the round, and the counter then talks in rows or rounds. The stitch counter goes back to 0 each time you add a row or round, a repeat counter can track “repeat 4 of 6”, and undo is always on screen for the tap you didn’t mean. On iPhone you can count from the Lock Screen, a widget or Siri. Counting is free, with no ads; Tufty Pro adds unlimited projects and counting by voice.
Common questions
Do I turn after each round?
Only if the pattern says so. Most joined rounds and all spiral rounds are worked without turning, so the same side always faces you.
Why does the seam on my joined rounds lean to one side?
The join and the beginning chain sit a little to one side of where the round started, so the seam drifts as it climbs. It’s normal. Turning at the end of each round, if the pattern allows it, keeps the seam straighter.
Can I work a spiral pattern in joined rounds, or the other way round?
Usually yes, as long as you keep the stitch count per round the same. Adding a join and a ch 1 that doesn’t count as a stitch turns a spiral into joined rounds. The look changes: you get a visible seam instead of a jog. Try a few rounds before you commit.
Does the magic ring count as Round 1?
No. Round 1 is the stitches you work into the ring, usually 6 single crochet. The ring is setup, like the foundation chain is for rows.