How to count rounds in amigurumi
Amigurumi is worked in spirals with no seam to count, and half the rounds look exactly alike. Here’s how to read a round, check it, keep count, and find your place when you’ve lost it.
Updated November 16, 2026 · 8 min read
An amigurumi pattern is mostly a list of rounds: increase until the piece is wide enough, work even until it’s tall enough, then decrease to close it. Every round matters. Miss one increase round and the head is too narrow; add an extra even round and the body comes out taller than the pattern photo. The good news is that amigurumi rounds are full of numbers you can check against, once you know where to look.
The quick answer
- Mark the first stitch of every round with a locking stitch marker, and move it up each time you get back to it.
- Count the round when you move the marker, never halfway round.
- Check the stitch count at the end of each increase or decrease round against the number in brackets at the end of the pattern line.
- Use the 6-per-round rule: in a standard single crochet circle, increase round n has 6 × n stitches. 24 stitches means you’ve just finished Round 4.
- For the even rounds, where nothing changes, rely on a counter or a running marker. Those are the rounds people lose.
How to read an amigurumi round
Take a typical line: Rnd 3: (sc, inc) x6 (18).
- Rnd 3 is the round number.
- (sc, inc) is the repeat: one single crochet in the next stitch, then an increase, which means two single crochet in the next stitch.
- x6 means work that repeat six times, all the way around.
- (18) at the end is the stitch count when the round is done: each repeat uses 2 stitches from the round below and makes 3, so 6 × 3 = 18.
Other lines you’ll meet:
- Rnd 1: 6 sc in MR (6): six single crochet into a magic ring. The ring itself isn’t a round.
- Rnd 2: inc x6 (12): two stitches in every stitch.
- Rnd 7–12: sc in each st around (36): six rounds with no increases. The count stays at 36 the whole time, which is why these rounds are easy to lose.
- Rnd 15: (sc 4, dec) x6 (30): a decrease round, the increases in reverse. A decrease (often an invisible decrease) turns two stitches into one.
Some patterns use square brackets or asterisks for the repeat instead of round brackets, and UK patterns write dc where US patterns write sc. The structure is the same. If a pattern’s abbreviations are new to you, read its key first.
The 6-per-round rule
Most amigurumi balls, heads and bodies start from 6 stitches and add 6 stitches each increase round. The increases spread out by one more stitch every round, so the pattern lines follow a rhythm you can learn by heart:
| Round | Pattern line | Stitches |
|---|---|---|
| 1 | 6 sc in MR | 6 |
| 2 | inc x6 | 12 |
| 3 | (sc, inc) x6 | 18 |
| 4 | (sc 2, inc) x6 | 24 |
| 5 | (sc 3, inc) x6 | 30 |
| 6 | (sc 4, inc) x6 | 36 |
| 7 | (sc 5, inc) x6 | 42 |
Two things follow from it. First, the number of plain single crochet in the repeat is always the round number minus 2: Round 6 is “sc 4, inc”. Second, the stitch count is the round number times 6, so a count is also a position check. If you count 30 stitches and your counter says Round 6, one of them is wrong, and it’s worth finding out which before you go on.
Many patterns stagger the increases so the piece comes out round rather than hexagonal. For example, one round might start “sc, inc, (sc 2, inc) x5, sc”. The stitch count still grows by 6, so the rule still works as a check, even though the line looks different.
Mark the first stitch
Spiral rounds have no join, so the only start of a round is the one you mark. The method:
- After the last stitch of Round 1, put a locking stitch marker into the first stitch of Round 2 as you make it.
- Work around. When you reach the marked stitch, take the marker out.
- Work into that stitch. It’s the first stitch of the new round.
- Clip the marker into the stitch you just made, then add one to your round count.
Some makers mark the last stitch of the round instead of the first. Either works. Pick one and stick to it, because switching halfway is a classic way to gain or lose a stitch.
The running marker
A clip only shows you the current round. A running marker shows all of them. Cut a long strand of smooth yarn in a contrasting colour. At the start of each round, lay it between the stitches and flip it over the work, to the front one round and to the back the next. When the piece is done you have a zigzag up the side, one step per round, and you can count the steps at any point. Pull it out when you’re finished.
Counting stitches in a round
Count the stitches along the top of the round, where each stitch shows as a small V lying flat. Don’t count the posts underneath. On a crowded round:
- Count in repeats, not stitches. For “(sc 3, inc) x6” you’re looking for six groups of 5 stitches. An increase is easy to spot: two V’s coming out of one stitch below.
- Count the increases. On an increase round there should be exactly 6 of them, spread evenly. Five means you missed one; seven means you doubled up.
- Check where the marker is. The stitch right under the marker is easy to miss or work twice. Most “off by one” rounds go wrong in the first or last stitch.
The even rounds: where count goes missing
“Rnd 8–14: sc around (42)” is seven rounds that all look identical, and the stitch count never changes. Nothing in the pattern tells you whether you’ve done four rounds or five. This is where you need either a counter you tap every time you move the marker, or the running marker.
If you still lose track, count in the fabric. Find the last increase round. It’s where the piece stops getting wider and starts going up like a tube. On the right side, single crochet in spiral rounds lines up in slightly slanting columns of V’s. Pick one column above the last increase round and count the V’s up to your hook. That’s how many even rounds you’ve done.
Lost count? Find your place in five steps
- Work to the marker and stop, so you’re at the end of a round.
- Count the stitches in the last round. If it’s a multiple of 6 during the increase section, it tells you which increase round you finished.
- Find the landmarks: the last increase round, the first decrease round, a colour change, or where you placed safety eyes. Patterns often say “insert eyes between Rnd 10 and 11”, and that’s a fixed point you can count from.
- Count the even rounds from that landmark, up one column of V’s or along the running marker.
- Write the round down or set your counter before you pick up the hook again. If you’re one round over in an even section, it’s often fine to unravel that round rather than live with a taller piece.
Keeping count: what works best for amigurumi
A pencil tally on the pattern is free and reliable, as long as the pencil is always with the pattern. A clicker is quick, but it counts one number, and amigurumi often needs two: the round you’re on and how far you are through it. That’s where a counter with a round count and a stitch or repeat count helps. Tap the stitch count at each increase, or after each repeat, so you always know where you are on a long round, and it starts again at zero when you move to the next round.
You can try that two-number setup for free in your browser with our online row and stitch counter. For a comparison of physical and phone counters, see row counter app vs clicker.
Counting amigurumi in Tufty
Tufty is our counter app for crochet and knitting, and amigurumi was one of the cases we had in mind. Set the project to “In the round” and the counter counts rounds; the stitch counter resets each time you add a round, and undo is right there for a double tap. A toy’s head, body and arms can be parts of one project, and a part you make twice shows as “Arm 1/2”, so you know which arm you’re on. Row reminders can tell you on the round where to insert the eyes or change colour. The free version has no ads and two active projects, with parts and reminders on one of them; Tufty Pro adds unlimited projects and counting by voice, handy when both hands are full of stuffing. If you have the pattern as a PDF or a photo, Tufty can also read your pattern and set up the rounds for you to check: one read is free to try, and yearly Pro includes 20 a month.
Common questions
Do you join rounds in amigurumi?
Usually not. Most amigurumi is worked in continuous spiral rounds, which give a seamless surface. If a pattern wants joined rounds, it says “join with sl st” at the end of each round.
Does the magic ring count as a round?
No. Round 1 is the stitches you work into the ring, usually 6 single crochet.
Why is my amigurumi ball shaped like a hexagon?
When every increase sits right above the one before, the six increase lines form corners. Patterns that stagger the increases (moving the start of the repeat each round) give a rounder shape. The stitch count is the same either way.
My stitch count is off by one. Where did it go?
Usually at the marker: the first stitch of the round was missed, or the last one was worked twice. Count the increases. If there are six and the count is still wrong, look at the stitches next to the marker.
What does “(18)” at the end of a round mean?
It’s the number of stitches you should have when the round is finished. Count them before you move on, at least on increase and decrease rounds.